Home
Ductless Air Cooling Models

Ductless Air Cooling Models

A Simple Solution for Air Conditioning Comfort

Designed for individual rooms or large zones, Hydro-Sil CoolAire can provide conditioned air for new or older homes. Easily fits in because you don't need duct work - all the benefits of central cooling without the hassle.

LCD REMOTE CONTROL

Hand held or wall mounted remote control comes with wall mounted cradle - sensing temperature and controlling interior unit with wireless signals from wall position, providing very accurate room data conditions to interior wall unit.

Key Features:

Temperature adjustment - cool or heat mode
Fan speed adjustment - auto or manual for heat & cool mode - also circulates air without heating or cooling
Louver adjustment up/down or side-to-side
Auto mode as room conditions dictate - adjust automatically - all functions cool-heat-fan-speed louver swing
Sleep mode - additional savings when suto reduces operations for energy savings
Independent humidity control
Auto defrosting for outside unit
Programmable timer for preset on/off operations
Filters and cleans air in all modes - also in fan only mode - filter is washable, no replacements to buy

Mini Split System Accessory Kits

Everything needed to connect the indoor and outdoor units - all in one box accessory kit includes:

25 ft. long pre-insulated copper liquid and gas tubing with factory installed flare fittings
Wall sleeve, flanges, and wall penetration sealant/putty for refrigerant tubing, condensate drain tubing, and wiring harnesses.
Copper stranded insulated 25 ft. long power and control wiring harnesses with labeled matching terminal connectors.
Tubing connections insulation and binding/sealing tape.

What Is a Ductless Mini-Split System?

A ductless mini split system consists of three main components: a condenser, an evaporator, and a remote control. The condenser (outside unit) is used to create air conditioning and the evaporator (inside unit) is used to distribute the air into the desired area. The condenser and the evaporator are connected with refrigerant line-sets and electrical wiring and can have a distance up to 100 feet between the indoor and outdoor units.

High wall split-systems can also provide heat. Split-systems that provide heat are called “Heat Pumps” and use a reversing valve to change the flow of the refrigerant to create warm air instead of cool air. High wall systems can produce between 9,000 Btu. and 30,000 Btu. of cooling or heating depending on the size of the system. Each high wall system comes standard with the evaporator, condenser, remote control, and field wiring. A thermostatic defrost wire is included with heat pump units.

Some of the benefits include:

Efficiency: Hydro-Sil CoolAire systems have SEER (Seasonal Energy Efficiency Rating) ratings from 13 and up. Less than 5% cooling loss occurs with split systems using insulated refrigerant line-sets versus up to 40% cooling loss for systems that use duct work. Split-systems are also very efficient because they cool or heat only the areas where indoor units are installed.
Quiet: Because of the distance between the condenser and the evaporator and specially designed low-noise fan motors and fan blades (as low as 32 decibels), split-systems are ideal for creating a quiet environment.
Easy Installation: Only a 3" hole is needed through a wall or roof to run the wiring and line-sets between the condenser and the evaporator. This keeps the inside and outside of the home aesthetically pleasing. All wiring is labelled separately to insure proper connections. Flare fitting connectors create quick, tight connections between the two units and the line-sets. Double insulated line-sets are used to reduce condensation from the extreme cool refrigerant that travels through the lines.
Environmentally Friendly: Hydro-Sil CoolAire split-systems offer environmentally friendly R410 refrigerant on select models to prevent the depletion of the ozone layer that protects us from harmful UV rays produced by the sun.
Inverter Compressors: Inverter compressor technology on higher SEER models are available for additional energy savings.

DUCTLESS systems are good for: